NEWS
新聞資訊
根據不同環境下對插針插孔有哪些不同的要求？
環境本身是檢驗一個物體的根本，是檢驗物體質量好壞的一項重要指標，因?yàn)槲矬w會根據不同環境在使用中的技術性能也將隨之發生改變。而插針插孔常被運用到不同的環境中，為確保性能的穩定，滿足各個復雜惡劣環境應用中的需求，它的環境性能是非常重要的。其溫度、濕度、鹽霧、振動和沖擊性都會造成插針插孔的壽命影響。
The environment itself is the basis of testing an object, and it is an important index to test the quality of the object, because the technical performance of the object in use will change according to the different environment. The pin jack is often used in different environments. In order to ensure the stability of performance and meet the requirements of various complex and harsh environments, its environmental performance is very important. Temperature, humidity, salt spray, vibration and impact will affect the life of pin sockets.
溫度：溫度是表示物體冷熱程度的物理量，不同季節、不同地域環境溫度都不一樣，它可改變物體的物理狀態，會對插針插孔的效能產生很大影響。為確保連接器的高效能，要求它的內在金屬組件要在一定溫度內能保持物理狀態不發生改變，因此規定要求它承受的溫度范圍是-60度-200度。在連通兩個組件后，電流經過時會產生熱量，溫度會上升，這是工作溫度，一般情況下，工作溫度和環境溫度相加在200度范圍內，是可承受的溫度范圍。
Temperature: Temperature is a physical quantity indicating the degree of heat and cold of an object. Temperature varies in different seasons and regions. It can change the physical state of an object and has a great impact on the efficiency of pin jacks. In order to ensure the high efficiency of the connector, it is required that the internal metal components of the connector should keep the physical state unchanged within a certain temperature. Therefore, the temperature range required for the connector is - 60 degrees - 200 degrees. After connecting the two components, the current will generate heat and the temperature will rise. This is the working temperature. Generally speaking, the working temperature and the ambient temperature are in the range of 200 degrees, which is a tolerable temperature range.
濕度：濕度是表示大氣干燥程度的物理量。水會對金屬組件產生腐蝕性，還具有一定的導電性，可降低緣性，而在一定溫度下在一定體積空氣內，濕度越高說明空氣中水汽越多，從而就會影響連接器的性能，因此連接器的組件材質要求一定要選擇水影響比較小的，并規定在40度左右的溫度、90%-95%的相對濕度中連接器必須至少要能正常工作96小時。
Humidity: Humidity is a physical quantity indicating the degree of dryness in the atmosphere. Water is corrosive to metal components, and has certain conductivity, which can reduce insulation. At a certain temperature, in a certain volume of air, the higher humidity, the more water vapor in the air, which will affect the performance of connectors. Therefore, the material requirements of connectors must choose water which has the smallest impact, and the same rules. The connector must be able to work normally for at least 96 hours at a temperature of about 40 degrees and relative humidity of 90%-95%.
鹽霧：鹽霧是指大氣中由含鹽微小液滴所構成的彌散系統，當溫度在35℃，鹽液濃度在3%時，會對物體產生很大的腐蝕，尤其是金屬材質的組件，從而會影響插針插孔的性能。為避免在鹽霧環境影響它的性能，要求它能在特定氯化鈉溶液人工制成的鹽霧環境中至少連續工作48小時。
Salt fog: Salt fog refers to a dispersion system consisting of tiny salty droplets in the atmosphere. When the temperature is 35 C and the concentration of salt solution is 3%, it will cause great corrosion to the object, especially the components of metal materials, which will affect the performance of pin jacks. In order to avoid the influence of salt fog on its performance, it is required to work continuously for at least 48 hours in a salt fog environment manually manufactured from a specific sodium chloride solution.
振動和沖擊：常常會影響連接器的電接觸可靠性和堅固性，通常在生產過程中會根據相關參數模擬振動沖擊的環境來檢驗它的性能，來延長壽命的使用。
Vibration and shock: often affect the electrical contact reliability and robustness of connectors. Usually in the production process, the performance of connectors is tested by simulating the environment of vibration and shock according to the relevant parameters to prolong the service life.
以上就是小編為大家所介紹的不同環境下插針插孔有哪些不同的要求，環境是影響物體的因素之一，插針插孔也是如此，為確保它能更好的適應到不同環境中，適應環境的要求是很重要的。
These are the different requirements of pin jacks in different environments introduced by Xiaobian. The environment is one of the factors affecting objects. The same is true of pin jacks. In order to ensure that it can better adapt to different environments, it is very important to adapt to the requirements of the environment.
